Naviepaint PrimaKOTE 3

Product Name : Inkopox WB Primakote
Code : SC 0995    
Type : Epoxy    
Suggested Use : For Concrete and Cement Fiber Board
Date : Apr 28, 2016    
         
FILM CHARACTERISTIC        
Inkopox WB Primakote is epoxy water base two-pack system. This product is very suitable to
be use as a primer for new surface of concrete or cement fiber board, or old surface after old
paint has been removed. Inkopox WB Primakote provides good adhesion to substrate, good
penetration, easy to apply, good weather resistance and alkali resistance.
         
PHYSICAL CHARACTERISTIC        
Solid Content by weight ( % ) :    30 ±  2    
Specific Gravity ( gr/cm³) : 0.94 ±  0.02  
Viscosity, Ford Cup #4, sec :      8 ± 2    
         
APPLICATION SUGGESTIONS        
Application : By manual brush  
Theoretical Coverage : 7 – 9 m²/liter    
Mixing Ratio : Component A (Coating) = 1 part
    Conponent B (Hardener) = 1 part
Hardener : SC 0996    
Thinning Ratio : Ready for use    
Drying Time ( Room Temperature ) : Touch dry = 4 hours
    Hard dry = 24 hours
Pot Life : 4 – 6 hours after mixing un normal condition
Recoating Interval : Min. 2 hours    
Storage Life : 6 months is original and closed container
    and stored in dry sheltered place ( 30°C )
Surface Preparation : Surface must be dry, clean and free from dirt, grease,
    and all contaminants.  
         
Remarks : 1. Stir thoroughly before and during application
    2. Containers should be kept tightly closed to prevent
       skinning    

 

Naviepaint TopKOTE 3   Naviepaint ColorKOTE 3   Naviepaint PrimaKOTE 3a

Download Brochure

 

 

Products Line Up

© 2024 PT. Nandikara Vistara Eka. All Rights Reserved.